ZENTA COLLECTION

Zenta Collection Relaxation Table measures W 2000 mm x D 600 mm x H 400 mm.

Zenta Collection Relaxation Table is made using CNC technology and metal bending.

Zenta Collection Relaxation Table is classified under the design label Relaxation Table.

Zenta Collection Relaxation Table supports the interactive meditation technique of raking sand to meditate and find inner peace.

Zenta Collection Relaxation Table features a designated teapot area that also functions as a simple tea rinsing station.

Zenta Collection Relaxation Table received the Silver A' Furniture Design Award in 2025.

Zenta Collection Relaxation Table project started in April 2024 and finished in July 2024.

Zenta Collection Relaxation Table was made in Viet Nam.

The tabletop is made from moisture-resistant MDF.

The metal frame is made from 5 mm cold-rolled mild steel, bent using a forming mold.

The total assembled weight is approximately 50 kg.

The tabletop is designed to support a maximum load of approximately 80 kg.

The tabletop is specified at 30 mm thickness.

A black powder-coated finish is applied to the surface.

The internal dimensions of the sand tray are approximately Ø580 mm in diameter and 18 mm in depth.

The table legs are fastened to the tabletop using mechanical bolts through pre-drilled holes.

Wipe with a soft dry or slightly damp cloth. Avoid abrasive cleaners and keep away from prolonged moisture.

This piece is a concept and prototype design; no formal safety certifications are required or applicable.

The materials used — MDF and mild steel — are widely recyclable, and low-VOC finishes are applied. No specific environmental certifications apply to this prototype.

Keep in a dry, well-ventilated environment away from direct sunlight, high humidity, and extreme temperatures.

A standard screwdriver or hex key is required for fastening the bolts during assembly.

The sand tray is subtly recessed to hold the sand securely, reflecting the design’s emphasis on calm, deliberate interaction rather than rapid movement.

A single decorative rock is provided, approximately 250–300 mm in height and weighing around 15 kg.

The 400 mm height was determined through ergonomic testing, ensuring that when seated on the cushion, the user’s hands rest naturally at tabletop level for comfortable tea and meditation activities.

Use only mild, non-abrasive cleaners or a damp soft cloth. Avoid solvents, alcohol-based, or acidic cleaning agents that could damage the protective coating.

Fine white quartz sand is recommended, though natural beige or gray tones may also be used to suit different aesthetic preferences.

Three circular platforms of different sizes invite users to compose their own meditative landscape — placing rocks, tea wares, or symbolic objects with complete freedom and intention.

Packaging dimensions are not fixed and will be defined according to the table’s configuration and transport needs.

Assembly is straightforward; detailed instructions will be provided if required.

Floor protection can be customized to suit the interior setting; felt or rubber pads are recommended for delicate surfaces.

Recommended for two users seated opposite each other on low cushions, encouraging balanced posture, mindful presence, and quiet dialogue.

The guide invites users to slow down, observe the dialogue between straight and curved lines, and engage with the sand through calm, deliberate motion — transforming the act of raking into a meditative practice of awareness and balance.

The sand can be gently removed and replaced manually as needed, using a small scoop or brush to maintain cleanliness and texture.

No formal abrasion resistance rating applies, but the powder-coated steel and sealed MDF surfaces provide adequate durability for indoor use.

No formal quality testing was conducted; however, each piece was visually inspected and manually checked during production to ensure stability and surface quality.